Se_icons_logos Se_icons_logos Se_icons_logos> Se_icons_logos Se_icons_logos Se_icons_logos Se_icons_logos Se_icons_logos Se_icons_logos Se_icons_logos _ ? _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ AMBEO3D _ _ _ close
MKE 2 digital
MKE 2 digital
MKE 2 digital
Microfone - Gravações de áudio - telefones celulares, câmeras ...

MKE 2 digital

Gravações profissionais para em movimento: O MKE 2 digital combina som cristalino com tecnologia de conversor de sinal de alta resolução do Apogee para dispositivos iOS modernos.
Artigo No. 506798

Informações Técnicas

  • Conector
    Apple Mfi certified Lightning connector
  • Frequência de RESPOSTA
    20 - 20,000 Hz
  • Nível máximo de pressão sonora
    @ min.gain: 130 dB; @ max. gain: 95 dB
  • Extensão de cabo
    1.6 m
  • Princípio transdutor
    pre-polarized condenser microphone
  • Peso
    29 g
  • Diâmetro
    4.8 mm (capsule)
  • Padrão de captação
    omnidirectional
  • Temperatura de operação
    0° C…+50°C
  • Nível de ruído equivalente
    @ min. gain: -95 dBFS (A); @ max.gain: -67 dBFS(A)
  • Ganho
    0 - 35 dB
  • Conversão AD
    multibit DeltaSigma
  • Processamento de sinal digital
    Compression, EQ (selectable presets via Apogee Maestro App)
  • Alimentação
    Supplied by iOS device
  • Sensibilidade
    @ min. gain: -50 dBFS (80 dB SPL, 1 kHz)<br>@ max. gain: -15 dBFS (80 dB SPL, 1 kHz)
  • Sampling rates
    44,1 / 48 / 88,2 / 96 kHz
  • Bitrate
    16 Bit, 24 Bit

FAQ

  • Can I listen through headphones while recording with a ClipMic digital or MKE 2 digital?

    You can certainly have a Sennheiser ClipMic digital or MKE 2 digital and a set of headphones or ear buds connected to an Apple device (iPhone, iPad, etc) and functioning together.

    To allow this set up to function correctly connect your headphones/ear buds first and then connect your ClipMic digital or MKE 2 digital. Next go to the ‘Settings’ tab and engage the ‘Input Monitor’ switch.

    It might be helpful to understand that iOS uses the most recently connected audio device for audio In/Out. If a ClipMic digital or MKE 2 digital is connected first and then a headset second the audio apps will use the headset for input and output. If the headset is connected first and then the ClipMic digital or MKE 2 digital second the audio apps will use the headset for output and the ClipMic digital or MKE 2 digital for input.



    MKE 2 digital ( #506798 )
  • How can I be sure that MetaRecorder is getting audio input from the right device?

    In MetaRecorder the active input device is indicated below the input gain slider display button ­ the button with the mic icon on it.



    MKE 2 digital ( #506798 )
  • How can I download MetaRecorder onto my iPad?

    As of version 1.01 MetaRecorder doesn’t include a layout specific for iPad, which leads to the app being listed as “iPhone Only” in the App Store’s search function. Nevertheless, it’s possible to download an “iPhone Only” app on your iPad and run it with absolutely no difference in operation.

    When searching for MetaRecorder on the App Store, set device filter to “iPhone Only” and download.



    MKE 2 digital ( #506798 )
  • How can I export audio files from the MetaRecorder App to another device?

    The MetaRecorder App offers three methods for sharing Scenes:

    ● Dropbox - the popular cloud­ based file sharing service

    ● Email

    ● iTunes - via a wired connection between your iOS device and your Mac/PC.

    Sharing Scenes via Dropbox

    To share one or more Scenes:

    - Tap the Scenes tab.

    - Tap Select/Done (P)​ then tap the Scene(s) to be shared.

    - Tap the Share icon at the bottom of the screen (Q)​.

    - Choose “Export to Dropbox". NOTE: A progress bar appears at the bottom of the screen to indicate Upload progress. 

    NOTE: Before sharing MetaRecorder Scenes via Dropbox you’ll need to create a Dropbox account (http://www.dropbox.com). Dropbox offers up to 2 TB of cloud storage at no cost plus very reasonable paid subscriptions.

    Sharing Scenes via Email

    To share one or more Scenes:

    - Tap the Scenes tab.

    - Tap Select/Done (P)​ then tap the Scene(s) to be shared.

    - Tap the Share icon at the bottom of the screen (Q)​.

    - Choose “Export via Email”. The iPhone’s Mail app is opened and an email draft is created with the selected Scene(s) attached.

    Sharing Scenes via iTune File Sharing

    By using the Lighting to USB cable that comes with the iPhone charger it’s possible to transfer Scene data to a computer. There’s no need to select Scenes to share via iTunes File Sharing ­because this method gives you direct access to the iPhone file storage system.

    To share one or more Scenes:

    - Connect the iPhone to your Mac or PC using the Lightning to USB cable that came with the iPhone/iPod charger and then launch iTunes.

    - Click on the iPhone or iPad icon. (1)

    - Select “Apps” on the iPhone or iPad. (2)

    - Scroll down to the “File Sharing” section and select “MetaRecorder”. (3)

    - Select the Scenes to be saved to the Mac/PC. (4)

    - Click “Save to…” and navigate to the desired Mac/PC folder. (5)



    MKE 2 digital ( #506798 )
  • How do I adjust the input level of the microphone on the Apogee MetaRecorder?

    To adjust the input level of the microphone on the Apogee MetaRecorder use the input level control slider.



    MKE 2 digital ( #506798 )
  • How do I start recording with the Apogee MetaRecorder?

    To start recording using the Apogee MetaRecorder simply press the RECORD button.



    MKE 2 digital ( #506798 )
  • What are the recording time limitations of the Broadcast Wave format?

    MetaRecorder can record and play back two file formats ­Broadcast Wave and CAF (Coure Audio File).

    Broadcast WAVE files have a 2GB size limit due to limitations of the format and iOS. This translates into the following maximum recording times per file (i.e. one continuous take) shown below. The number of separate files that may be recorded is limited only by available storage on the device. Swipe the Playhead time to the left to see available recording time/storage. 

    If you need to record one continuous file for longer than the maximum recording times indicated above choose the CAF audio format.



    MKE 2 digital ( #506798 )
  • What does the main screen of the Apogee MetaRecorder look like?



    MKE 2 digital ( #506798 )
  • What does the markers screen of the Apogee MetaRecorder look like?



    MKE 2 digital ( #506798 )
  • Where can I find the MetaRecorder User’s Guide?

    The MetaRecorder User’s Guide may be found in the app at Settings > Help.

    The User's Guide can also be located on Apogee’s website (http://www.apogeedigital.com/support-documentation/metarecorder-users-guide) in the Support/MetaRecorder section.



    MKE 2 digital ( #506798 )
  • Why doesn’t Input Monitoring work at 88.2/96kHz?

    Input Monitoring will only work at 88.2/96kHz if your output device supports these sample rates. If you are using an Apogee MiC 96k or a Sennheiser ClipMic you can record at 88.2/96kHz, but you may not be able to use input monitoring if you’re using the iDevice’s built­-in output or Apple ear­buds since both of these output devices only support up to 48kHz.

    The recorded file will still be at 88.2/96kHz, but when you play it back you will be listening at 44.1/48kHz. If you would like to use input monitoring while recording, you can use a lower sample ­rate, such as 44.1 or 48kHz or if you would like to stay at a higher sample­ rate, you can use an input/output device that supports 88.2/96kHz on input and output, such as the Apogee ONE for iPad & Mac or the Apogee Duet for iPad & Mac.



    MKE 2 digital ( #506798 )
  • Why does recording stop on the MetaRecorder after 60 seconds?

    The free version of MetaRecorder downloaded from the Apple App Store is limited to 60 seconds of continuous recording.

    There are two options to unlock the app’s full functionality:

    Option 1: Connect a compatible Sennheiser or Apogee or device one time. Once full functionality is unlocked once it remains unlocked until a new app update is installed.

    Compatible devices:

    ● Sennheiser ClipMic digital

    ● Sennheiser MKE 2 digital

    ● Apogee Mic

    ● Apogee Jam

    ● Apogee ONE

    ● Apogee Duet

    ● Apogee Quartet

    Option 2: ­Purchase the In­App Upgrade to full functionality from the App Store.



    MKE 2 digital ( #506798 )
  • Why does the MetaRecorder record my headphones/earbuds mic rather than the ClipMic digital or MKE 2 digital signal?

    When the MetaRecorder is recording the signal from the microphone of your headphones or ear buds rather than the signal from your ClipMic digital or MKE 2 digital it means that the connection configuration has occurred in the incorrect order.

    To allow this set up to function correctly connect your headphones/ear buds first and then connect your ClipMic digital or MKE 2 digital. Next go to the ‘Settings’ tab and engage the ‘Input Monitor’ switch.

    It might be helpful to understand that iOS uses the most recently connected audio device for audio In/Out. If a ClipMic digital or MKE 2 digital is connected first and then a headset second the audio apps will use the headset for input and output. If the headset is connected first and then the ClipMic digital or MKE 2 digital second the audio apps will use the headset for output and the ClipMic digital or MKE 2 for input.



    MKE 2 digital ( #506798 )
  • Why is the sample rate/bit resolution indicator on the MetaRecorder orange?

    The orange indicates that the playback sample rate doesn’t match the Scene recording rate. For example, if you’re recording with an input­ only device such as Apogee MiC or Sennheiser ClipMic digital at 96kHz and listening through the iPhone’s headphone jack, the sample rate switches to 48kHz during playback, due to the fact that the headphone output doesn’t support the higher sample rate. Don’t worry, the recorded files are still at the higher sample rate.



    MKE 2 digital ( #506798 )

Downloads

  • Guias rápidos
  • Literatura digital
  • Technical Data
    • MKE 2 - Safety instructions and specifications (530 KB) Download

  • Declaração de Conformidade CE
    • ClipMic digital MKE 2 digital (360 KB) Download

Som profissional digital - pela primeira vez para iOS

O MKE 2 digital entrega áudio high-end para seu vídeo, documentário, transmissão ou entrevistas. Você tem uma grande audiência em mente? Com esse set, você obtém áudios perfeitos - mesmo trabalhando sozinho. Os experts de gravação da Apogee e Sennheiser proporcionam uma simples e brilhante solução de gravação. Todos os aplicativos atuais para dispositivos iOS inclusos.

Som profissional digital - pela primeira vez para iOS

Vídeos

Atualize seu som para HD também

Para todos os profissionais que vivem para capturar momentos especiais: o MKE 2 digital entrega qualidade de som de estúdio - em um nível que não muito tempo atrás só era possível com um gasto e esforço muito maiores.

Atualize seu som para HD também

Oratória

"Você gravou isso no estúdio?"

O MKE 2 digital é um microfone de transmissão com qualidade profissional. Ele dá profundidade e presença à voz e captura ótimas nuances em cada situação. O fato de que os metadados chave e marcadores são diretamente adotados quando transferindo dados para programas de edição também facilita o fluxo de trabalho.

"Você gravou isso no estúdio?"

Eventos

Capturando momentos mágicos de forma segura

Existem situações especiais na vida que não são prováveis de serem repetidas. Esses momentos são os que mais precisamos que a tecnologia funcione em perfeita harmonia com as nossas vidas. Para isso, o MKE 2 digital proporciona tecnologias em que os profissionais podem confiar.

Capturando momentos mágicos de forma segura

O microfone

Filmes de frente famosos e TV

O MKE 2 é uma lenda em performances ao vivo; ele se consolidou como padrão da indústria mundial na Broadway, televisão e em captação profissional de notícias. Graças ao seu corpo robusto e seu diafragma ultraleve (Umbrella Diaphragm - TM), ele está protegido da umidade e se mantém durável em qualquer situação. O defletor de vento é produzido em variações de proteção de espuma e metal e pode também ser combinado para otimizar as gravações.

Filmes de frente famosos e TV

O conversor

A arte da conversão do sinal

Para o MKE 2 digital, os experts da Apogee desenvolveram um conversor especial Analógico/Digital que vai muito além das possibilidades oferecidas pelas soluções anteriores. Um fluxo de dados de 96kHz / 24bit entrega a mais alta qualidade de áudio ao seu dispositivo iOS.

A arte da conversão do sinal

Os aplicativos

Todos os aplicativos que você precisa

O MetaRecorder não somente salva as gravações mas também simplifica tanto o manuseio no local quanto a subsequente sincronização - incluindo arquivos XML para o Final Cut Pro. E para aqueles que preferem trabalhar com outros aplicativos de gravação ou edição de vídeo, o app Maestro pode ser utilizado para controlar os mínimos detalhes do microfone e da gravação.

Baixe na App Store
Todos os aplicativos que você precisa

O conector Lightning

Conecte e vá

O MKE 2 digital utiliza o conector lightning, dessa forma ele salva o fluxo de dados com alta qualidade diretamente no seu dispositivo iOS. Isso deixa o conector do seu headphone livre para ser usado para monitorar o que você está gravando.

Conecte e vá