O HD 280 PRO são fones de ouvido do tipo circumaural projetados para monitoração profissional.
Graças a sua robusta construção e excelente blindagem, não são apenas ideais a uma série de aplicações; o atenuador de ruídos especial de 32 dB permite o uso em ambientes altamente ruidosos. Comece a festa e deixa a música fluir por seus ouvidos.
Alta atenuação do ruído ambiente
Reprodução de som precisa e linear
Almofadas suáveis para um ajuste confortável
Auscultadores dobráveis e giratórios para poupar espaço no transporte
Cabo resistente e de um só lado
To remove the ear pads of the HD 280 PRO headphones simply pull on the ear pad until it detaches from the ear cup.
The back side of the ear pads of the HD 280 PRO have a circle of leatherette. This circle of leatherette hooks into the groove on the HD 280 PRO ear cups to hold the ear pad in place. The easiest way to get the circle of leatherette into place is to hook part of the circle of leatherette into the groove then put your fingers inside the ear pad and push up and out until the leatherette circle hooks into place. Continue this motion all the way around the ear pad until the ear pad is fully in place.
Please review this video (http://www.youtube.com/watch?v=SXqL7Q-tW6Y) to see how to change the ear pads of the HD 280 PRO headphones.
NOTE: This procedure is the same for all the different variants of the HD 280 Series like the HMD 280-13, HMD 280-XQ, HMD 281-13, HMD 281-XQ.
With Sennheiser headphones the audio will always be accurate and responsive and is sure to please no matter what situation you need it for.
An open (sometimes referred to as "open aire" headphone is one that uses some external airspace to reproduce life-like audio within the ear-cup. Think of it as having premium speakers next to your ears that you can control the volume for with extreme precision. The trade-off is that at extreme volumes some sound will leak out. Some of our "open aire" models include the HD 800, HD 700, HD 650, HD 600, HD 598, HD 558 and HD 518.
A closed headphone isolates you from your environment and vice-versa (ie: the sound is contained within the headphones). This is perfect for critical listening or a situation where you do not want to disturb/be disturbed. Some of our "closed" models include the MOMENTUM, Urbanite XL, HD 380 PRO, HD 280 PRO, HD 449 and HD 439.
If the headphones have sound in only one ear or differing sound levels in each ear or the sound in general is not what you expected then it needs to be determined where the issue lies - with the headphones or with the audio source.
The first thing to do is ensure that you have the audio plug of the headphones connected securely into the audio device. A properly connected cable should not wiggle. If the plug wiggles that could indicate a loose connection. NOTE: This could be a result of the cable not being plugged all the way in or it could be a faulty input or sometimes if the device you are connecting to has a case on it the case will prevent the cable plugging in correctly.
The next thing to do is to check and make sure that there is no debris (ie: no dust or lint) in the headphone jack of the audio source that may be inhibiting connectivity and causing sound issues.
The next thing to do is to check that the connecting jack is clean. If oils from the hands gets builds up on the plug or sweat evaporates on the plug the salts and grime may prevent proper contact from occurring. The connecting jacks can be cleaned using a basic alcohol wipe.The next thing to do is to try the headphones on a different audio source to check that it is not the original audio source (or a setting on the audio source) that is creating the issue. If you connect to an alternate audio source and the issue is not there then you know the headphones are fine and the original audio source is the issue. NOTE: Many modern audio devices have audio limit pre-set at the factory and these limit need to be changed to get the full audio signal out of the device and to the headphones.