S1 DIGITAL
Aviation Headset - Pilot Headset

S1 DIGITAL

The new S1 Digital general aviation headset was specially developed for pilots of single- and twin-engine propeller aircraft respectively helicopter and ensures safe and reliable voice communication, easy control, outstanding audio quality, and wearing comfort.
Artigo No. 504212

Visão Geral

A revolução silenciosa:

O novo S1 Digital para a aviação em geral foi especialmente desenvolvido para pilotos de helicóptero garantindo clareza de comunicação, facilidade de controle, incrível qualidade de áudio e conforto de uso. No coração destas inovações técnicas está o sistema Digital Adaptativo NoiseGard™, a tecnologia que estabelece novos padrões em termos de compensação de ruído e torna o sonho de voar ainda mais seguro. Com o apertar de um botão o Headset adapta-se aos ruído do ambiente do cockpit em segundos.

Para o desenvolvimento do S1 Digital, a Sennheiser encontrou o parceiro perfeito, o BMW Group Designworks USA. O resultado desta colaboração são a região de monóculo, o controle de aumento de agudos e o ajuste de pressão de contato. A interface sem fio Bluetooth permite conectar o headset a um celular ou tocador MP3 player tornando a experiência acima das nuvens inesquecível.


Características

  • Smart Update digital ANR personaliza a redução de ruído para o ambiente da aeronave

  • Tensão da alça ajustável para conforto customizado

  • Cúpulas dobráveis

  • Aumento de agudos para clareza de áudio

  • Proteção contra picos de áudio

  • Headset pode ser usado com óculos

  • Comunicação especialmente projetada e filtros para otimizar o áudio

  • Fone Bluetooth e conectividade musical

  • Microfone com tensão de polarização para uso com celular

  • Operação livre de falhas - headset pode ser usado em modo convencional, passivo em caso de falta de energia


O que vem na caixa?

  • 1 S1 DIGITAL headset
  • 1 bolsa de transporte para headset e acessórios
  • 1 clip de cabo
  • 1 clip de cinto
  • 1 protetor contra vento e plosivos
  • 1 guia rápido
  • 1 instruções de operação

Informações Técnicas

  • Cor
    preto
  • Tecnologia
    Codec: SBC

Microfone

  • Conector
    Headphones: 6.3 mm
  • Conector
    Microphone: PJ-068, 5.25 mm (or equivalent)
  • Frequência de resposta (Microfone)
    100 Hz - 10000 Hz
  • Peso
    w/o cable: 410 g / 14.5 oz
  • Temperatura de armazenamento
    -55° C à +70° C
  • Temperatura de operação
    -15° C à +55° C
  • Tempo de operação
    40 h with lithium batteries AA
  • Voltagem de saída
    20 - 80 mV/Pa adjustable, 35 mV/Pa factory preset
  • Voltagem de operação (independente)
    8 - 16 VDC

Headphones

  • Frequência de resposta (fones de ouvido)
    20 - 16000 Hz
  • Nível máximo de pressão sonora
    115 dB à 1 kHz
  • Princípio transdutor
    dynamic
  • Impedância nominal
    active + passive: 180/130 Ω mono

Bluetooth

  • Versão Bluetooth
    Version 2.1 + EDR
  • Tecnologia
    HSP, HFP, A2DP, AVRCP supported profiles
  • Faixa
    < 10 m
  • Frequências de transmissão/recepção
    2,4 GHz - 2,48 GHz
  • Frequências de transmissão/recepção
    Transmission Power: 8 dBm

FAQ

  • Are the S1 Series headsets offered with alternate connections?

    The S1 Series (S1 Digital, S1 NoiseGARD & S1 Passive) of headsets are designed for General Aviation fixed wing applications and hence are terminated in the standard PJ 068 (5.25 mm) and PJ 055 (6.35 mm) plugs.

    The S1 Series is not offered in any other connector variations or adapters. If you need a different connection then an adapter would be needed to convert the dual plugs to the connection that you need and this adapter would be sourced from your preferred Aviation vendor.



    S1 DIGITAL ( #504212 )
  • Do the S1 Series headsets have TSO Certification?

    None of the S1 Series products (S1 Digital, S1 NoiseGard, S1 Passive) are TSO certified. There are no plans for these models to get TSO certification as they are designed for the General Aviation Pilot and TSO certification is not needed in these instances.

    In a situation where TSO certification is needed (ie: an Airline Pilot or a corporate flight department) then Aviation headset options with TSO certification are as follows:

    - HME 110 - (This is the only General Aviation headset that has TSO documents. It is a good headset for regional airline pilots not wanting ANR).
    - HMEC 26 - (All products have the TSO and are designed for the Commercial Airline Pilot).
    - HMEC 46 - (All products have the TSO and are designed for the Commercial Airline Pilot).



    S1 DIGITAL ( #504212 )
  • How do I adjust the S1 Digital microphone sensitivity?

    The microphone sensitivity adjustment is done via the small screw inside the control box.

    NOTE: A slotted screw driver is needed for this adjustment.



    S1 DIGITAL ( #504212 )
  • How do I adjust the S1 NoiseGARD microphone sensitivity?

    To adjust the microphone sensitivity of the S1 NoiseGARD use a small slotted screwdriver to turn the adjustment screw on the microphone.



    S1 DIGITAL ( #504212 )
  • How do I adjust the S1 Passive microphone sensitivity?

    To adjust the microphone sensitivity of the S1 NoiseGARD use a small slotted screwdriver to turn the adjustment screw on the microphone.



    S1 DIGITAL ( #504212 )
  • How do I adjust the tension of the S1 Series headsets?



    S1 DIGITAL ( #504212 )
  • What is the "auto shut off" feature on the S1 headsets?



    S1 DIGITAL ( #504212 )
  • What is the Bluetooth pairing process for the S1 Digital headset?

    So long as the device you want to connect to via Bluetooth supports the appropriate Bluetooth version (2.1 or higher and EDR) and the appropriate Bluetooth profiles (A2DP, HSP, HPF, AVRCP) you should have connectivity with your S1 Digital headset. Please make sure your device is supporting the appropriate Bluetooth version and Profiles. Depending on your device you may need to manually turn these profiles on. NOTE: Sometimes an update will have occurred on the device that you are connecting to and it requires the device to be rebooted before the headphones will connect.

    To pair the S1 Digital please use these steps:

    1) Ensure batteries are in the headset and correctly aligned and securely in place.
    2) Slide the ANR (Active Noise Reduction) to "ON" and a the LED indicator light will turn on.
    3) Press and hold the Sennheiser logo in middle of control until it flashes alternating RED and BLUE.
    4) Make sure device's Bluetooth is on and wait for it to locate the Sennheiser S1 Digital.

    NOTE: The ANR (Active Noise Reduction) must be on in order for the Bluetooth function to work. If you are not connected into a plane the ANR (Active Noise Reduction) will not turn on unless you open the battery box and switch the auto shut off to the "OFF" position. Once you have done this you will see a light to indicate that the ANR (Active Noise Reduction) is on without the ANR (Active Noise Reduction) actually being on.

    NOTE: This process is outlined on Page 13 of the instruction manual.



    S1 DIGITAL ( #504212 )
  • What should I do if my S1 Digital headset is not working for cell phone calls outside of the plane?

    The S1 Digital headset has an auto shut off feature that helps conserve energy. If the "auto shut off" feature is activated then the headset will not work for cell phone calls when the headset is disconnected from the plane.

    To allow the headset to work for cell phone calls when disconnected from the plane the "auto shut off" feature must be turned OFF.



    S1 DIGITAL ( #504212 )
  • What terminations are used on the cable of the S1 Series headsets?

    The S1 Series (S1 Digital, S1 NoiseGARD & S1 Passive) of headsets are designed for General Aviation fixed wing applications and hence are terminated in the standard PJ 068 (5.25 mm) and PJ 055 (6.35 mm) plugs.



    S1 DIGITAL ( #504212 )
  • PJ055 Headphone Plug

    The PJ055 Headphone Plug is the standard ¼ inch (6.3 mm) plug found on many aircraft headsets.



    S1 DIGITAL ( #504212 )
  • PJ068 Microphone Plug

    The PJ068 Microphone Plug is the standard 5.25mm plug found on most aircraft headsets.

    On some Sennheiser headsets (HMEC25/45 series KAP version only) the tip of this plug can be used to power (28 volt aircraft only) the NoiseGard power supply.



    S1 DIGITAL ( #504212 )

Downloads

  • Misc
    • S1_DIGITAL_545306_0711_EN_INT.pdf (11 MB) Download

  • Declaração UE de conformidade
  • Literatura digital
    • 542569_S1_DIGITAL_brochure_GB.pdf (490 KB) Download